If you're having problems with the look of your countertop, it may be time for some countertop refinishing. This is a fairly easy project to do. Here's what you need to do.
Start by sanding off the old coating that covers your countertop. This will get rid of any dirt or grease that's on there. You can usually just use an electric sander to accomplish this. Then use an acid based cleaner such as Sherwood Cleaner or Vinyl Cleaner to get rid of stains from your countertop. You can always repaint it later with a different cleaner if you feel like a change. This article discuss more on countertop refinishing services, read on for more info.
The next step in countertop refinishing is to get down to the baseboards and pull out the hardware. Do this by loosening all of the drawstrings on the countertop first. Now you can work on the top part of the countertop. You can do this all at once or you can do little by little refinishing one section at a time.
You will have to sand down the boards to rough them up a bit before you start finishing them off. This helps keep them from sharpening up during the finishing process. Make sure to use a sander to get the boards even. Sanding them coarse will just give them a rough edge.
After doing all of the above, take a fine steel blade and cut along the board edges as well as along the refinished lines. This will keep any rough spots from showing through the finish. Use the same type of cleaner for your boards, as you did for the top part of the countertop refinishing. Follow up with some more sanding and polishing to get everything nice and flat again.
When you're done, you should be left with a pretty flat surface that you can put a cabinet on. If it is a good finish, you shouldn't have to put a whole lot of screws in the ground to make it secure. If you have to, use a cinder block under the cabinet so that it doesn't move around too much. Then you can just sit back and enjoy your new kitchen area. Refinishing is a lot easier than people think and you don't have to be an experienced woodworker to accomplish this task. View page to understand more about the charges and countertop designs now!
When you're first looking for ideas, you should probably start at your existing countertops and see what you can do to update them. The countertop materials are usually what determine most of the look of your kitchen so start there and see what kind of effect you want. If you really like stainless steel, you may want to stay away from wood and go for granite instead. If you have a granite countertop, you can actually have it sealed so that it stays pristine forever. It's a great material for people who like a high tech look.
Countertop refinishing is something that should be a snap for anyone. When you have a well-finished project, you will have a countertop that looks great and functions well for years to come. Take some time and find out some ideas for refinishing so you can get the results you want. You may need to check out this article: https://en.wikipedia.org/wiki/Refinishing to get more info on the topic.
